Daktronics All Sport 4000 Series - Manual (Page 88)

Event Counter Operation
23-4
23.3.1 RTD Item Numbers
The console sends out data in a Venus 1500 RTD packet as shown below once every
second for code 373, or standard V4600/V7000 RTD for code 374.
Item # Function Offset
01 Value x 10,000,000 0
02 Value x 1,000,000 1
03 Value x 100,000 2
04 Value x 10,000 3
05 Value x 1,000 4
06 Value x 100 5
07 Value x 10 6
08 Value x 1 7
23.4 External Input Counter Codes 375 & 376
Code 375 - This code is used for the Venus 1500 Output. Venus 1500 configuration: Baud Rate
19,200, 8 Data Bits, and No Parity.
Code 376 - This code is used for standard RTD Output (V4600/V7000). Venus 4600
configuration: Baud Rate 9,600, 8 Data Bits, and Even Parity.
< INCREMENT VALUE
!>
This key is used to set the increment value. The increment value can have up to 4
significant digits. This value is the amount that is added to the total value every time an
external switch input 1 is detected.
< DECREMENT VALUE
!>
This key is used to set the decrement value. The decrement value can have up to 4
significant digits. This value is the amount that is subtracted from the total value each
time an external switch input 2 is detected.
< TIME INTERVAL
!>
Not used for these codes.
< START >
Not used for these codes.
< STOP >
Not used for these codes.
< SET MAIN CLOCK
!>
Not used for these codes.
< COUNT UP / DOWN
!>
Not used for these codes.