Daktronics All Sport 4000 Series - Manual (Page 15)

Console Connectors
2-1
Section 2: Console Connectors
J1 & J2: Scoreboard outputs
J3: Remote start/stop and the horn
J4: Main output and input port
J5: Shot clock or delay-of-game control
S1: Power switch
There are two ways to connect signal, depending on the type of installation.
! One type of signal cable has a 25-pin connector on one end and a 16-pin circular plug on the
other. The 25-pin connector goes into J4 of the console, and the 16-pin plug goes into the
scoreboard junction box (j-box).
! The second type has a / " headphone plug at both ends. One end goes into J1 or J2 of the 1
4
console, and the other end into the scoreboard j-box.
For more information concerning various types of installations, refer to Appendix A.