Daktronics All Sport 4000 Series User Manual

Page 20

Basic Operation

3-4

12.

BRIGHT Y/N
Yes - Sets the display to bright
No - Sets the display to dim

13.

STOP/RES DG Y/N (Football)
Yes - Sets for reset of delay of game on stop
No - Sets for no reset of delay of game on stop.

14.

PRO & SPORT Y/N (Pitch & Speed)
Yes- Selects Stalker Pro Radar Gun
No- Selects Stalker Sport Radar Gun

15.

SHOW ADV TIME Y/N (Wrestling)
Yes - Show advantage time on the scoreboard
No - Show team score on the scoreboard

16.

TEST DISPLAY Y/N
Yes - Enters a test mode for testing display digits
No - Exits menu

Note: This is a production test option for some scoreboard models. When this option is
selected the console cycles through number patterns on each group of scoreboard digits
and cycles through the different digit groups on the scoreboard. Pressing the <

START

> key

turns all digits on, and <

STOP

> turns all digits off. The <

SET MAIN CLOCK

> key starts the

CYCLE ALL

pattern and the <

COUNT UP/DOWN

> key starts the

CYCLE GROUP

pattern. The <

HORN

> key puts it in single step mode and can be used to step it through

the test. The keys on the insert (starting in the upper left corner and from left to right) are
used to select the group of digits being tested. The remote start/stop console can be used
to control the test also. The <

HORN

> switch single steps through the test, the <

START

position selects

STEP ALL

and the <

STOP

> position selects

STEP GROUP

3.5

Startup

When the console is turned on, it cycles through a self test, after which the LCD prompts

Resume Game?

Press <

YES

> to resume the last game stored in memory. This is useful when

power to the console is lost during a game. Pressing <

> will then prompt

Enter Code

The last code used will be displayed. To accept the code shown, press <

ENTER

>. If this is not the

desired code, enter a new code and press <

ENTER

3.6

Time Of Day Operation

Note: This operation is only available on scoreboards equipped with a game clock. No sport insert
is required for this operation. If this code is entered while another code is running, any
information entered during the first code will be lost.

To have the game clock on the scoreboard display the time of day, enter code 99 (refer to Section
3.4 or 3.5 to enter a code). Use the <

SET MAIN CLOCK

> key to enter the correct time of day. The

menu choice

Select 24Hr

can be used to select either a 12 or 24-hour time format.