Daktronics Pro Series Quick Start Manual - Manual (Page 2)

E-STOP RECOGNITION
Emergency Stop (E-Stop)
recognition is done in
every module. When the
VAC senses an E-Stop
button is engaged...
The E-STOPS button
activates and begins
flashing.
A window with the location
of the E-Stop appears for
two seconds.
Display
Touch the E-STOPS button
and the E-Stop Alert panel
will display.
Note: In Manual or Setup,
the VAC interface will be
frozen while the E-Stop Alert
panel is displayed.
If another E-Stop is engaged
while the panel is open, then
its name will appear at the
top of the list. When an E-
Stop is disengaged, its name
is removed from the list.
The panel will close when
all of the E-Stops are
disengaged.
Touch the gold arrows that
appear in the upper right cor-
ner of an E-Stop Alert panel
to hide it. E-
ST
OP
R
EC
O
G
NI
TI
ON