Daktronics Pro Series Quick Start Manual - Manual (Page 11)

VIEW
An overview of motors is displayed
when the VIEW button is touched.
When VIEW is touched, up to
sixty motors are displayed.
If your VAC has more than
60 motors, use the “Previous”
and “Next” buttons to change
the display.
Individual Display
All of the available information
for the motor is displayed using
the Hoist Info panel and Digital
I/O panel. These are the same
as in Manual Motor Info.
The “Previous” and “Next” buttons
move the display backward and
forward one batten at a time.
The “Up” button will return to the
Numerical Information panel.
Touch a batten
display to see the
View Numerical
panel.
Numerical Information
“Previous” and “Next” move the display five battens.
“Up” returns to the opening display. LIMITS or
TARGETS button will display numerical information
for limits or targets. Touch a motor to view details.
Each motor displayed shows the
upper/lower limits bars, current
position and name. A blue name
means the motor is grouped.
A red name means the batten
is disabled. A red background
means the motor is faulted.
CURTAIN
Your VAC might have a bi-part
curtain motor. If so, when you
select this motor in Manual or
Setup mode, the display will
look like above.
Instead of Up/Down
buttons, you will see Open/
Close buttons. Although the
buttons look different, they
work the same.
Auto Open/Close
To move the motor to its upper, lower or
alternate targets, touch AUTO OPEN/CLOSE.
To move to a target, set the speed using the
speed button, then touch either of the target
buttons. The motor will move instantly.
When the motor begins moving, the CANCEL
button will change to STOP. Touch STOP to
halt the motor’s movement.
Curtain Display
The dark blue button shows
the value for the upper
target. The blue vertical
line shows the upper target
curtain position.
The light blue bar shows the
value of the curtain’s current
position. When the curtain
moves, the curtain graphic
moves.
Alternate target positions
are shown with gold vertical
bars.
The green button shows the
value for the lower target.
Green vertical lines show the
lower target curtain position.
V
IE
W / CU
R
TA
IN