Daktronics AF-3700-20 RGB - Manual (Page 27)

Section 4: Signal Installation Overview
Daktronics GalaxyPro ® displays are equipped to receive many types of communication signals. The
following sections include a brief description of each available communication type. Also included is
a list of troubleshooting tips to check that the display is connected and configured correctly.
For specific details on installing the communication signal, consult the quick guide and manual
included in the box with the communication equipment. Each type of communication is listed below
with its manual number.
Communication Type Communication Manual ED#
Wireless Ethernet Bridge ED-16483
Ethernet ED-14745
Fiber Ethernet ED-14746
Note: These are the standard communication types but each site is unique and may include
additional equipment. If problems arise, contact the display’s service company or Daktronics
Customer Service.
4.1 Primary Mirror Display Interconnections
If this display is a two-sided primary/mirror display, a quick-
connect cable will be provided to connect the signal between the
two display faces. This cable has right-angle plugs at each end.
These need to be installed with the cable facing either down or to
the side to provide the least stress on the cable. In addition, secure
the excess cable to the supports to prevent damage from weather or
vandalism (Figure 26).
Figure 26: Quick-connect
Cable
Larger displays will have more than one quick-connect per display
face. Be sure to connect all necessary signal interconnections
(Figure 27).
Figure 27: Multiple Quick-connect Connections
Signal Installation 17