Daktronics AF-3700-20 RGB - Manual (Page 14)

Figure 5: Back View of Typical Display
Pre-installation Checklist
Verify the following before proceeding with installation:
• The display is in good condition after shipping and uncrating.
• A straight and square-mounting frame is provided for the display.
Height variation in any four-foot horizontal section may not exceed ¼-inch.
• Adequate support is provided for the display so that the structure will not yield at
any unsupported points after mounting.
• Clearance of 4" of unobstructed space above the top of the display is allowed to
remove the eyebolt. Note: No clearance is required once the eyebolt is removed.
• Clearance around the display is maintained to allow unobstructed air flow through
the vents and fans and to allow access to internal components.
2.2 Display Mounting
In order to maintain the structural integrity of the display cabinet, the 90° angle between the
cabinet and the lifting method must be maintained.
Figure 6: Multiple Section Lifting Not Advised
Do not lift combined sections by the eyebolts.
The eyebolts and interconnect bolts are not strong
enough to support the weight of multiple sections.
If damage occurs because of improper lifting
procedures, the warranty will be void.
4 Mechanical Installation