Daktronics Valo Digital Billboard - Manual (Page 11)

Display Identification
Section 2: Display Identification
Daktronics has shipped three major series of Valo ® digital billboards. The 1000 series shipped from
2005 to 2008. The 2000 series shipped from October 2007 to November 2009. The 3000 series started
shipping on December 2009. There are differences in the design and components in each series, and it
is important to be able to identify the differences as service and maintenance requirements vary by
series.
Figure 2: 1000 Series
2.1 1000 Series Display
There were many variations within the 1000
series displays; however, the cabinet design
remained consistent. The 1000 series displays
are front access only. This is the easiest way to
identify the series. Refer to Figure 2.
2.2 2000 Series Display
The 2000 series displays have minor variations
in the series. The cabinet and technologies
remain similar. The 2000 series displays can be
accessed from the rear as well as the front. To
identify these displays, look for rear access
doors on the back of the display. Refer to
Figure 3.
Figure 3: 2000 Series
2.3 3000 Series Display
The 3000 series rear-mounted remote
enclosure is standard for all shipments. The
3000 series displays can be accessed from the
rear as well as the front. To identify these
displays, look for rear access doors on the back
of the display. Refer to Figure 4.
Figure 4: 3000 Series
3