beautypg.com

Daktronics Galaxy AF-3500/3550 User Manual

Page 16

background image

12

Signal Installation Overview

• Click

Start > All Programs > Daktronics > M2Config or double-click the shortcut on the desktop.

3. Configure the communication method to connect to the display by choosing Network, then

Configure Connection or click the Configure Connection icon.

4. The M2 Configuration Studio has two folders under the Configuration tab:

Click the

Communications folder.

5. Choose the following for your display to configure a direct

connection:

• Type: TCP/IP

• Address: 1 (refer to address dials on controller for

actual setting)

• IP Address: 172.16.192.25

6. Choose Network and Connect or click the Connect icon to

connect to the display.

This manual is related to the following products: