Daktronics PC-2001 Pace Clock System - Manual (Page 7)

Introduction 1
Section 1: Introduction
This manual explains the installation and maintenance of Daktronics Portable Pace Clock, PC-2001.
For additional information regarding the safety, installation, operation, or service of these displays,
refer to the telephone numbers listed in Section ‎5.6. This manual is not specific to a particular
installation.
Important Safeguards:
 Please read and understand all instructions before beginning the installation process.
 Do not drop control equipment or allow it to get wet.
 Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void.
 Disconnect display power when not in use or when servicing.
 Disconnect display power before servicing power supplies to avoid electrical shock.
Power supplies run on high voltage and may cause physical injury if touched while
powered.
 Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics, Inc.
Project-specific information takes precedence over any other general information found in
this manual.
1.1 Display Label
Serial and model numbers can be found on the ID label on the display as shown in Figure 1.
Please list the model number, display serial number, and the date this display became
operational in the blanks provided on the second page of this manual. When calling
Daktronics customer service, please have this information available to ensure the request is
serviced as quickly as possible.
Figure 1: Display ID Label