Daktronics PC-2001 Pace Clock System - Manual (Page 22)

16 Controls & Timing Functions
MENU-CHANGE MODE
7-SHOT CLOCK {}
SHOT CLOCK 35
HORN=AUTO
MENU-CHANGE MODE
8-12HR T.O.D. {}
12HR TI ME OF DAY
12:00AM
MENU-CHANGE MODE
9-24HR T.O.D. {}
24HR TI ME OF DAY
13:00
MENU-CHANGE MODE
10-STRT RCT N.O.
PLATFORM:OPEN
READY
MENU-CHANGE MODE
11-RLY RCT N.O.
PL:OPEN TP:OPEN
READY
Mode #7: Shot Clock
Press the <START> key to start the countdown from the
preset shot clock time. While the clock is running, press the
<RESET> key to start the clock over again at the preset time
and automatically start counting down. Press the <STOP>
key to pause the countdown. When the clock is stopped,
pressing <RESET> will place the clock at the preset time;
however, <START> must then be pressed to resume the
countdown as it will not begin automatically.
Mode #8: 12 Hour Time of Day
To change the time of day, press <MENU>, and then press
<ENTER>. Press <ENTER>, input the desired time using
the keypad, and then press <ENTER> once more. Select
whether the time is AM or PM using the arrow keys, and
then press <ENTER> to save the time of day settings.
Mode #9: 24 Hour Time of Day
To change the time of day, press <MENU>, and then press
<ENTER>. Press <ENTER>, input the desired time using
the keypad, and then press <ENTER> once more.
Mode #10: Start Reaction, Normally Open
(Daktronics)
When the PC-2001 is plugged into a relay take-off platform,
the <START> key starts timing from the time the key is
pressed to the time the swimmer leaves the platform.
The JC-100 will display if the platform is open or closed
before the start. A horn start may also be used as a start
supplementary to the push of the button. A negative
number indicates an early leave. Press the <RESET> key to
start the program over.
Mode #11: Relay Reaction, Normally Open (Daktronics)
When the PC-2001 is plugged into both a touchpad and a
relay take-off platform and the platform is closed, the JC-
100 will automatically start the timing from when the
touchpad is touched by the first swimmer to the time the
platform is left by the next swimmer. A negative number
indicates an early leave. Press the <RESET> key to start
the program over.