Cybex 625T Treadmill - Manual (Page 25)

2. Unthread the nut at the end of the A/V cable.
Qty. Description
1 A/V cable 1
1 Nut 2
3. Insert the A/V cable into the D-shaped hole in the mounting plate on the front of the unit.
Qty. Description
1 A/V cable hole 1
1 CSAFE coupler 2
1 Nut 3
1 Mounting plate 4
1 A/V cable 5
1 CSAFE cable, Red 6
4. Thread the nut removed in step 2 onto the A/V cable by hand.
5. Install the A/V cable to the mounting plate on the front of the unit using a 14 mm open end wrench.
6. Plug the CSAFE cable into the CSAFE coupler on the front of the unit.
Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
Qty. Description
1 Base 1
7 Screws 2
1 Shield 3
Page 25 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H