Cybex 625T Treadmill - Manual (Page 23)

2. Insert the display cable into the top of the right upright until it exits the hole at the base of the right
upright.
Qty. Description
1 Insert display cable here 1
1 Hole 2
3. Place the console assembly in position on the bolts installed in step 1 in the left and right uprights.
4. Thread six bolts into the remaining holes of the right upright and left upright.
Qty. Description
1 Console 1
1 Upright (Right shown) 2
3 Bolt 3
5. Tighten all of the bolts using a 7/32" Allen wrench and 9/16" open end wrench.
Connect Display Cable
The display cable and CSAFE cable have the same connectors. The display cable is black, the CSAFE
cable is red.
1. Route the cables under all other cables and towards the base plate.
Page 23 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H