Cybex 625T Treadmill - Manual (Page 22)

4. Thread four bolts into the right upright by hand.
Description
1 Upright (Right shown) 1
4 Bolt 2
5. Repeat steps 1 through 4 for the left upright.
Install console assembly to the uprights
If unit includes optional A/V or other cables, follow same display cable procedure.
1. Thread one bolt, into the top back hole for each side of the console assembly by hand. Do not fully
thread bolts into the console assembly.
Qty. Description
1 Console 1
1 Upright (Right shown) 2
1 Bolt 3
1 Display cable 4
1 Front of unit 5
Do not pinch or damage display cable when installing console assembly.
Two people are required for the following two steps.
Page 22 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H