Cybex 750C Cycle Bike - Manual (Page 35)

Cybex 750C/750R Cycle Owner’s Manual
35
5-Default Time Initial displayed choice
for programs requiring
a time setting.
DEFLT TIME 10 DEFLT TIME 20
DEFLT TIME 30 (factory default) DEFLT TIME 60
DEFLT TIME 90
Choices are limited to range of MAX time.
6- Review Time Summary of workout
session totals. Can
be seen as 1, 2 or 3
cycles. SHORT – 1 LONG – 1
SHORT – 2 LONG – 2
SHORT – 3 LONG – 3
7-Max Time Limit user’s workout
time
MAX TIME = OFF MAX TIME = 60 (default)
MAX TIME = 20 MAX TIME = 90
MAX TIME = 30 MAX TIME = 120
MAX TIME = 40 MAX TIME = ZONED*
MAX TIME = 50
8-Pause Time Length of time unit
paused during a
workout and still re-
start where user left off.
PAUSE = OFF (factory setting)
PAUSE = 01:00
PAUSE = 05:00
PAUSE = 10:00
9-Default Level Mode Levels
DEFAULT LVL 1 – 21 (LVL 1 is default)
10-Target RPM
For Advanced
Programs
TARGET RPM 10 - 100 (RPM 60 is default.)
11-Sound
TONE = ON (default)
TONE = OFF
12-Dormant Style
Defines what is
displayed in Dormant
Mode 0 – DEFAULT (factory default)
1 – TEXT MSG
2 – OUT OF ORDER
3 – CLOCK
4 – PROFILES
13-Dormant Text ENTER allows editing
and viewing. DORMANT MSG 1
DORMANT MSG 2
DORMANT MSG BOTH
14- Active Mode
Text on/off
ENTER allows editing
and viewing.
WORKOUT MSG ON (or OFF)
15-Lock
Combination Requires correct entry
of combination. Allows
lock combination to be
enabled and edited.
Master factory code is
4300. Enter on first
set up.
ENTER OLD CODE (Key in 4-digit code)
CODE _ _ _ _ ON (or OFF) ENTER will allow code
to be seen. LOAD Control key toggles the lock on
or off.
Use keypad to enter a new code. ENTER accepts
new code.
Temporarily lock unit by pressing LOCK key (#5
LOCK) and enter 4-digit code. Unit will stay locked
until UNLOCKED is selected.
16-Custom
Programs SAVE Gives user capability
to create and store
custom programs by
enabling of disabling
SAVE button during
Review Mode.
SAVE PROG ON (or OFF). (factory default is OFF)