Cybex 750C Cycle Bike - Manual (Page 30)

Cybex 750C/750R Cycle Owner’s Manual
30
Attach the console assembly to base assembly.
If attaching the A/V option, refer to the 750R A/V bracket installation instructions (supplied with the
A/V bracket).
1.
Locate the console assembly (#2) and four mounting screws 5/16-18 x .75” (#11). See
Figure 3.
#11
#1
Figure 3
#2
2.
Hand thread two mounting screws 5/16-18 x .75” (#11) into the base assembly. See Figure 4.
Figure 4
#11
#2
#1
The console assembly (#2) will need to be supported during steps 3 through 5.
3. Place the console assembly (#2) in the correct position on the base assembly (#1) by sliding
into position onto the two mounting screws 5/16-18 x .75” (#11). See Figure 4.
4.
Hand thread the other two screws 5/16-18 x .75” (#11). See Figure 3.
5.
Securely fasten the four screws 5/16-18 x .75” (#11) with a 1/2” socket wrench.