Cybex 750C Cycle Bike - Manual (Page 24)

Cybex 750C/750R Cycle Owner’s Manual
24
5.
Hand thread the other two screws 5/16-18 x .75” (#11). See Figure 2.
6.
Securely fasten the four screws 5/16-18 x 75” (#11) with a 1/2” socket wrench.
7. Plug the display cable into the display cable connector on the lower control board. See
Figure 4. Ensure the cable connector is securely fastened.
Figure 4
Display
Cable
Connector
Display
Cable
Install the front covers.
1.
Locate and place the front left cover (#4) on the front of the unit as shown in Figure 5.
2.
Using a Phillips screwdriver, secure with one screw 8-16 x .50” (#12).
In addition to the mounting screws, there are four plastic connectors that secure the front covers
together. Ensure that all four plastic connectors are inserted properly in each front cover. See
Figure 5.
Figure 5
#12
#5
#4
#12
Plastic
Connectors
3.
Locate and place the front right cover (#5) on the front of the unit as shown in Figure 5.
4.
Using a Phillips screwdriver, secure with one screw 8-16 x .50” (#12). See Figure 5.