CREATOR SC-PIP202 - Manual (Page 23)

CREATOR CORPORATION (CHINA) 2010-06 WWW.CREATOR1997.COM
17 Users Manual of Multi-signal PIP Upscaling Switcher
图 6-7
Other Setting
Others displays other settings, with following
options available.
A:Code Setting
Region Settings display code setting window.
Please make relevant selections, as picture 6-8.
Picture 6-8
B:Password Management Setting
Password displays the window of password
management setting. Please make relevant
password management setting, as picture 6-9.
Picture 6-9
C:Identification Setting.
Log displays identification setting window, as
picture 6-10.
Picture 6-10
D: Firmware Upgrade
Upgrade displays the window of firmware
upgrade, as picture 6-11.
In the process of upgrade, please do not
disconnect the power. Otherwise the upgrade will
be failed. The process of upgrade takes about 2
minutes. After finishing the upgrade, the system
will automatically jump to the front page. Please
be patient to wait.
Picture 6-11
E: Restore Factory Default Setting
Factory Default displays the option window of
restoring to factory default, as picture 6-12.
After restoring to factory default, all user
configurations will be deleted. If necessary,
please use the function of Backup Configuration
to save current router configuration. You may
access to http://192.168.1.254 to re-setup the
router using "admin" as both user name and
password.