CREATOR SC-PIP202 - Manual (Page 19)

CREATOR CORPORATION (CHINA) 2010-06 WWW.CREATOR1997.COM
13 Users Manual of Multi-signal PIP Upscaling Switcher
temporary stop playback. It is the same as
FREEZE button on the front panel of the host.
cancel frozen: Cancel frozen picture.
OUTPUT RESOLUTION Setup Options
Support the following resolutions output:
800x600@60H 、 1024x768@60H 、
1280x720@60H 、 1280x1024@60H 、
1366x768@60H 、 1400x1050@60H 、
1920x1080@60H and default（Reset to factory
default resolution) optional。
OSD MENU Setup Option
OSD menu has enter, exit, left ,right, and OK
options.
5.4.5 MAIN AUDIO
MAIN AUDIO (audio control of the main output)
includes SOURCE SETTING (signal option) and
VOLUME (target audio) and VOLUME SETTING.
SOURCE SETTING Setup Options
Control 8-way video sources of COMP1, COMP2,
CV1, CV2, Y/C1, Y/C2, VGA and DVI
VOLUME Setup Options
main: Setup the audio source and MIC
volume in the same time.
source: Separate control on the volume from
audio sources
MIC: Separate control on MIC volume
VOLUME SETTING Setup Option
Setup volume and mute of the selected
target
Picture 5-7
5.4.6 OTHER INSTRUCTIONS
OTHER INSTRUCTIONS include OTHER
INSTRUCTIONS and READ AND WRITE EDID
(EDID).
OTHER INSTRUCTIONS Setup Options
lock buttons: To avoid accidence, lock the
buttons on the front panel of the host after setting
up necessary values.
cancel: Open up the buttons function on the
front panel of the host.
Erase memory: Delete the information
automatically saved after powered off.
READ AND WRITE EDID Setup Option
Projection: Read and write the EDID from the
monitor connected to the projector and transfer it
to the device.
Preview: Read and write the EDID from the
monitor connected to preview and transfer it to
the device.
Default: Restore default EDID.
Note: When reading and writing EDID, DVI input
signal is not for connection.