CREATOR SC-PIP202 - Manual (Page 21)

CREATOR CORPORATION (CHINA) 2010-06 WWW.CREATOR1997.COM
15 Users Manual of Multi-signal PIP Upscaling Switcher
Chapter 6 Wireless Access Point
CR-WF10 Wireless Access Point is a WiFi
connector for communication between
SC-PIP202 host and WiFi G7 Wireless Touch
Screen.
6.1 CR-WF 10 Wireless AP
CR-WF 10 Wireless (WiFi) AP is a brand new
wireless point, and a mediate of resolving the
communication between CREATOR Wireless
(WiFi) Dual Touch Screen and control host.
Tiny and concise in appearance, the product
supports IEEE802.11b/g protocol, with maximum
transmission rate of 54Mbps, supporting
high-speed wireless internet connection,
providing stable wireless connection for an area
of 40 square meters, supporting multiple cascade
connections, wireless connection mode, wireless
AP/relay mode, and bridging mode.
Functions and Features
◆ Flexible and reliable WAP support makes
any model of touch screen working in an
extensive covered area or region.
◆ Support multiple VLAN (Visual local-area
network), single WAP can be used for
establishing inter-independent and safe network.
And it can be operated separately.
◆ With 3 configuration modes: wireless access
point mode, wireless access point/relay mode
and bridging mode.
◆ Support computer high speed internet
connection.
◆ Support IEEE 802.11b/g international protocol.
◆ Support remote control as far as 40m (without
obstacle) indoor, and 305m (without obstacle)
outdoor.
◆ Support maximum transmission rate of
54Mbps.
Socket Instruction
① POWER:Power indicator.
② RESET:Reset button is for restoring factory
default setting. Press it slightly to reset, press and
hold it for 10 seconds to restore factory default
setting.
③ ETHERNET: Connect to internet.
④ Power socket: Self-adapt to DC 12V power
6.1.1 CR-WF10 Setup Instruction
1、 Connect CR-WF10 Wireless (WiFi) Access
Point to PC with a standard network cable.
2、 Connect to power and turn it on.
3、 Open Explorer, and input 192.168.1.254
(default). See picture 6-1.
4、 Input user name: admin and password:
admin (default) in the pop-up window.