CREATOR SC-PIP202 - Manual (Page 12)

CREATOR CORPORATION (CHINA) 2010-06 WWW.CREATOR1997.COM
6 Users Manual of Multi-signal PIP Upscaling Switcher
B:ADVANCE Setup Option
RESOLUTION:Display resolution
information.
NOISE REDUCE:Selection of noise
reduction include off, low, mid, high and auto.
SCALE:Selection of screen zoom in/out
modes include full, normal and auto.
MEMORY RECALL:Restore factory default.
Picture 3-3
C:OSD Setup Options
OSD H-POSITION:OSD horizontal position
adjustment
OSD V-POSITION:OSD vertical position
adjustment
OSD HALFTON:OSD transparency
adjustment
OSD DURATION:OSD display duration
adjustment
Picture 3-4
2、When the big screen is displaying the signal
from VGA, its OSD menu setup options include
PICTURE、ADVANCE、OSD、GEOMETRY
After accessing to the screen, move the ADJUST
button on the panel to setup the needed value,
while the monitor will display the status in real
time.
After finishing the setup, press the ENTER button
on the panel to access to the lower tier menu for
relevant setup with the operation as above.
A:PICTURE Setup Options（See 3-5）
PICTURE MODE:select picture display
modes including standard, dynamic, sofe and
personal.
CONTRAST:Contrast adjustment
BRIGHTNESS: Brightness adjustment
COLOR TEMP:Color temperature modes
selection, including normal, warm, cold and user.
USER-R:When the COLOR TEMP is under
the User mode, parameter R is ready for setup
USER-G:When the COLOR TEMP is under the
User mode, parameter G is ready for setup
USER-B:When the COLOR TEMP is under
the User mode, parameter B is ready for setup
Picture 3-5
B:ADVANCE Setup Options（See 3-6）
RESOLUTION:Option of Display resolution
NOISE REDUCE:Selection of noise
reduction include off, low, mid, high and auto
SCALE:Selection of screen zoom in/out
modes includes full, normal and auto
MEMORY RECALL: Restore factory
default.