Contemporary Control Systems BASrouter Installation Guide (Firmware 2.x) - Manual (Page 22)

TD071200-0IK
22
If you click the button labelled Foreign Device Registration
(FDR), the screen shown in Figure 18 appears (unless you have
not checked the BBMD Enable box). This screen will report all
devices that have registered with the BASRT-B as Foreign
Devices and how long they will remain registered unless a re-
registration occurs.
Figure 18 — Foreign Device Registrations
7.2 Status Screen
The Status Screen depicted in reports the traffic of the various
protocols handled by the BASRT-B. It shows the number of
messages received and transmitted for each of the supported
networks. ―BIP 1‖ is the primary BACnet/IP port and ―BIP 2‖ is
the secondary port.
Figure 19 — Status Screen
―Available Memory‖ (at the bottom of the list) is the amount of
RAM remaining after buffers are allocated. If one network is
temporarily offline and another network is attempting to
communicate with this network, the available memory may drop
very low until the offline network returns to an online condition.