Contemporary Control Systems BASrouter Installation Guide (Firmware 2.x) - Manual (Page 15)

TD071200-0IK
15
After entering the router’s IP address into your browser’s
address field, you will see the Logon Screen of Figure 14. The
default value of both the User Name and Password is admin.
Figure 14 — Router Logon Screen
After successfully logging on, the Router Configuration Page initially
appears with the default values as shown in Figure 15.
Figure 15 — Router Configuration Page with Default Values
Each configuration parameter is explained on the following pages.
When Save Changes is selected, the parameters are stored to
non-volatile memory, the unit will automatically reboot (in a few
seconds) and the changes will take effect.
Three buttons in Figure 15 (Advanced, Status and Security) access
more screens and are discussed in Section 7.