1 device parameters, 1 device name (default value = basrt-bxxxxxx), 2 device instance (default value = 0) – Contemporary Control Systems BASrouter Installation Guide (Firmware 2.x) User Manual

Page 16: 2 bacnet ethernet, 1 ethernet network (default value = 0)

Text mode
Original mode

1 device parameters, 1 device name (default value = basrt-bxxxxxx), 2 device instance (default value = 0) | 2 bacnet ethernet, 1 ethernet network (default value = 0) | Contemporary Control Systems BASrouter Installation Guide (Firmware 2.x) User Manual | Page 16 / 24

This manual is related to the following products:

BASrouter Installation Guide (Firmware 2.6.x) BASrouter Installation Guide (Firmware 1.x) BASrouter Installation Guide (Firmware 2.7.x)