ConnectGear WR400 User Manual
Page 69
69
RIP defect
Protection from RIP defect
Stateful Packet Inspection
The router will analyze all packets of
selected protocols according to the state of
all sessions and block all abnormal packets.
When hackers attempt to enter your network, we can alert you by e-mail
Email Address
En
ter the email address that you would like the
alert warning to be sent to should an attack
occur
SMTP Server Address
Enter the IP address of the above email
address’ SMTP server
POP3 Server Address
Enter the IP address of the above email
address’ POP3 server
User Name
Enter the User Name of the above POP3 server
Password
Enter the Password of the above POP3 server
Connection Policy
Setup wait and idle timeout of session states. All
timeout sessions will be removed to protect the
router from DoS attacks.
DoS Detect Criteria
Setup the criteria of each kind of abnormal
events. Any abnormal event that happens more
often than the allowed criteria will be treated as
DoS attack and the router will record this event
in the security log and alert the user by e-mail.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)