ConnectGear WR400 - Manual (Page 46)

46
Parameters
Default Description
Passphrase
If you want the router to generate WEP keys for
you, you can enter a passphrase and press
. The router will generate all keys
for you.
Key
The WEP key used to encrypt data transmitted
in the wireless network. You can enter by
yourself or let the router generate it for you.
Default Key 1
In the 64-bit WEP mode, you have four WEP
keys. You have to select one of them as the
default key. The router will use this default WEP
key to encrypt data in wireless network
transmission.
Clear (All) Keys
After you press , all the WEP
keys will be cleared to be empty.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)