ConnectGear WR400 - Manual (Page 60)

60
Add PC
Parameters
Description
Client PC Description The description for this client PC rule.
Client PC IP Addresses
Enter the IP address range that you wish to apply this
Access Control rule. This is the user’s IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users’ last digit (octet) IP address and the last user’s last
octet IP address in the appropriate boxes. If you want to
select only one user then input the user’s last digit IP
address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.