ConnectGear WR400 User Manual
Page 41
41
2.4 Wireless
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE
802.11b wireless network adaptor connect to your Intranet. It supports WEP encryption
and MAC address filter to enhance the security of your wireless network.
Parameters
Default
Description
Enable or disable Enable
You can select to enable or disable the wireless
access point module of this router.
Wireless module
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)