ConnectGear WR400 User Manual
Page 59
59
2.6.1 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Access Control allows
users to define the traffic type permitted or not permitted in your LAN. You can control which PC
client uses what services and also the time period in which they can have access to these
services.
Parameters
Description
Enable Client Filtering
You must select whether to enable (Yes) or disable (No)
the Access control function that you’ve configured in this
screen
Add PC
You can click Add PC to add an access control rule
for users by IP addresses.
Client PC MAC addresses
Enter the MAC addresses of client PCs that you
want to block from accessing the Internet.
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)