ConnectGear WR400 User Manual

Page 38

Text mode
Original mode

2.3.1 Interface

The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports
as well as a subnet mask for your LAN segment.

Parameters

Default

Description

LAN IP
IP address

192.168.2.1

This is the router’s LAN port IP address (Your
LAN clients default gateway IP address)

IP Subnet Mask

255.255.255.0

Specify a Subnet Mask for your LAN segment

DHCP Server

Enabled

You can enable or disable the DHCP server. By
enabling the DHCP server the router will
automatically give your LAN clients an IP
address. If the DHCP is not enabled then you’ll
have to manually set your LAN client’s IP
addresses; make sure the LAN Client is in the