Comtech EF Data RCU108 User Manual

Page 17

RCU108 1:8 Protection Switch

Installation

TM066 - Rev. 1

Page 2-7

This SMA/Female connector goes to the RF connector of the RCU108 to the RF
connector (J14) of the RCU108. The connection is made with CA/3602-U, a supplied
item.

2.4.4.2 Rear Panel Section A, Converter Number 2

J4 - IF Converter

This BNC/Female connector is routed from the IF connector (J2) of the RCU108 to J2 of
primary converter number 2. The connection is made through the IF cable assembly
CA/3598 which is a supplied item.

J5 - IF In/Out

This BNC/Female connector is routed from the User IF connector of the RCU108 to the
User Interface.

J9 - RF In/Out

This SMA/Female connector is routed from the User RF connector of the RCU108 to the
User Interface.

J10 - RF Converter

This SMA/Female connector goes to the RF connector of the RCU108 to the Primary
Converter number 2 (J1). This connection is made through supplied RF cable assembly
CA/3602-2.

J15 - Converter Interconnect

This SMA/Female connector goes to the RF connector of the RCU108 to the RF
connector (J12) section B of the RCU108. The connection is made with RF cable
assembly CA/3602-U, a supplied item.

2.4.4.3 Rear Panel Section B, Converter Number 3

J2 - IF Converter

This BNC/Female connector is routed from the IF connector (J2) of the RCU108 to J2 of
primary converter number 3. The connection is made through the IF cable assembly
CA/3598 which is a supplied item.

J3 - IF In/Out

This BNC/Female connector is routed from the User IF connector of the RCU108 to the
User Interface.

J7 - RF In/Out

This SMA/Female connector is routed from the User RF connector of the RCU108 to the
User Interface.

J8 - RF Converter

This SMA/Female connector goes to the RF connector of the RCU108 to the Primary
Converter number 3 (J1). This connection is made through supplied RF cable assembly
CA/3602-3.

J13 - RF Backup Interface

This SMA/Female connector goes to the RF connector of the RCU108 to the RF
connector (J14) of the RCU108. This connection is made through the supplied RF cable
assembly CA/3602-U.