Comtech EF Data CPLINK - Manual (Page 23)

21
5. Batteries
Since the m100 (no longer in production) and m105 /m125 use AAA batteries, it is
prudent to replace the batteries with fresh ones if the Palm
 will be in use for an
extended period of time. The m100 and the m105 models do not support expansion cards.
If the batteries fail on either of these two Palms, the CPLINK program will be lost and
will have to be reloaded from a local PC via HOTSYNC operation.
There are capacitors built into the Palm
 m100 / m105 devices to provide about 1 minute
of sustained power while changing the batteries. This should provide enough time to
change the batteries without having to reload the CPLINK program.
6. Cable Connections
RED
BOX
or
XCVR
A single cable is used to connect the Palm models
M100 and m105 to the Redundancy Controller
(RED Box). CEFD P/N: CA/WR9185
RED
BOX
or
XCVR
If using Palm models m125 or m500,
two cables are provided. Connect the 9
pin D male-female connectors together,
then connect the Palm handheld to the
RED Box or XCVR.
CEFD part number:
PP/PALM-P10804U CEFD part number:
CA/WR9902