Comtech EF Data SDM-300L - Manual (Page 54)

SDM-300L Satellite Modem Operation
Rev. 2 3–13
TX CHAN #1 MODE
D&I ENABLED
T1/E1 ENABLED
DISABLED
(Normal D&I/G.703 menus
are operational)
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
TX CHAN #1 DR
1544.0 kbit/s
2048 kbit/s for BYPASS
64 kbit/s for D&I
TX CHAN #2 MODE
ADPCM ENABLED
ADPCM DISABLED
(Allows 32 kbit/s operation)
TX CHAN #3 MODE
ASYNC EIA-232
SYNC EIA-232
ASYNC EIA-422
SYNC EIA-422
AUPC
DISABLED
TX CHAN #3 DR
SYNC EIA-422:
0.6 to 4000.0 kbit/s
(All other models:
0.6 to 64.0 kbit/s)
(Not displayed if AUPC or
DISABLED is selected.)
TX CHAN #3 PHASE
NORMAL
INVERTED
(Not displayed if AUPC or
DISABLED is selected.)
TX CHAN #4 MODE
ASYNC EIA-232
SYNC EIA-232
ASYNC EIA-485
AUPC
DISABLED
TX CHAN #4 DR
0.6 to 64.0 kbit/s
(Not displayed if AUPC or
DISABLED is selected.)
TX CHAN #4 PHASE
NORMAL
INVERTED
(Not displayed if AUPC or
DISABLED is selected.)
SDM300L "TYPE"
VER: X.X.X
FUNCTION SELECT
CONFIGURATION
CONFIGURATION
FLEX MUX
C
Key:
Note: Flex Mux PCB (Card Slot #1)
installed). Modem Type: Custom,
Overhead Type: Flex Mux.
Figure 3-9. Configuration Flex Mux
Note: The Flex Mux Channel 1, D&I will operate with other modems that are set for D&I as long
as Channels 2, 3, and 4 are Off.