Comtech EF Data CMR-5940 Manual - Manual (Page 36)

CMR-5940 Digicast Media Router PID Filter RS-422 Revision A
Device Management via User Interfaces MN/PIDFILDC4.IOM
4.2.9 Service Filter Route Configuration
Figure 4-11. Service Filter Route Configuration page
Enable
Enables or disables the program.
Name
The name of the incoming program that is extracted from the Program Service
Information.
PID (In/Out)
The PID number for the element and the configured egress PID number. The
incoming and outgoing PIDs may be different.
Program (In/Out)
The program number for the program and the configured egress program number.
The incoming and outgoing programs may be different.
PMT PID (In/Out)
The hexadecimal value of the PMT PID to the PID Filter. The incoming and
outgoing PMT PIDs may be different.
Login Required
A user name and password are required to make any changes to the CMR-5940
configuration.
4-12