Comtech EF Data CMR-5940 Manual - Manual (Page 35)

CMR-5940 Digicast Media Router PID Filter RS-422 Revision A
Device Management via User Interfaces MN/PIDFILDC4.IOM
4.2.8 ASI MPEG TS Route Configuration
Figure 4-10. ASI MPEG TS Route Configuration page
The ASI MPEG TS Route Configuration page features a pop-up window that notifies the
user of available configurable programs/services.
Enable
Enables or disables the route.
Name
The name of the incoming program that is extracted from the Program Service
Information.
Program Number
The program number to be routed to the Ethernet as Transport Stream over IP.
Destination IP
The IP address to be used when routing the Transport Stream over Ethernet IP.
Destination Port
The Port Number to be used when routing the Transport Stream over Ethernet IP.
PMT PID
The PID assigned to the PMT.
Login Required
A user name and password are required to make any changes to the CMR-5940
configuration.
4-11