Appendix b. ip routing support, B.1 introduction, B.2 route configuration – Comtech EF Data CME-5000 Manual User Manual
Page 73: B.2.1 unicast routing
Appendix B. IP ROUTING
SUPPORT
B.1 Introduction
Offering state-of-the-art encapsulation based on the DVB Specification for Data
Broadcasting (EN 301 192), the MENCAP 50 provides the following configuration
features:
• IP Encapsulation per Multi-Protocol Encapsulation (EN 301 192)
• Unicast Routing
• Multicast Routing
• Section Packing and Non-Section Packing
• 1,024 Configurable Routes (10,000 configurable routes are available as an
option)
• Multicast Zones
• IP Copy
• 802.1q VLAN
B.2 Route
Configuration
Both Unicast and Multicast IP datagrams are encapsulated per the Multi-Protocol
Encapsulation specification. Routing of datagrams is accomplished by configuration of
the ME Route Table, described in the following section.
B.2.1 Unicast
Routing
Unicast routing provides point-to-point delivery of IP datagrams. Routes for Unicast IP
packets are configured according to the following:
B-1