5 specifications – Comtech EF Data CME-5000 Manual User Manual
Page 23
Digicast Micro Encapsulator (MENCAP)
Revision A
Introduction
MN/MENCAPEDC.IOM
Figure 1-5. Digicast MENCAP Redundancy (CME-5100 or CME-5110)
1.5 Specifications
Table 1-1 outlines the technical specifications for both MENCAP 50 standalone units.
Table 1-2 describes the CME-1600 Redundancy Switch specifications. For detailed
MENCAP 50 and Redundancy Switch connector pin assignment information, refer to
Chapter 3 – Interface Pinouts.
Figure 1-6. Digicast MENCAP 50 Rear Panel (typical)
a) Side Panel – Secondary b) Rear Panel c) Side Panel – Primary
Figure 1-7. Digicast MENCAP 50 – CME-1600 Redundancy Switch
1–5
This manual is related to the following products: