M 2 c – Comtech EF Data CiM Quick-Start Guide User Manual
Page 22
CiM Quick Start Guide
Rev. 1
Operation
CD/CIMQSTART.IOM
12
4
Set AccessClient2
a
Set IP Address to 172.17.10.0
b
Number of subnet bits to 24
Now PC 2 (and any other device on network 172.17.10.0/24) will be able to ping CiM 1
or access CiM 1 via Telnet or FTP or web interface.
1.9.2.2 C
I
M 2 C
ONFIGURATION
Step Description
1
From the Main Menu select Administration sub-menu.
2
From the Administration menu, select Access Lists sub-menu
3
Set AccessClient1
a
Set IP Address to 172.16.10.0
b
Set Number of subnet bits to 24
c
Set Access List Enforcement to Enabled
Now CiM 2 can only be pinged from PC 1 (and any other device on network
172.16.10.0/24) or accessed via Telnet or FTP or web interface. PC 2 will not be able to
ping CiM 2 or access via any other means. To allow PC 2 access to CiM 2:
3
Set AccessClient2
a
Set IP Address to 172.17.10.0
b
Set Number of subnet bits to 24
Now PC 2 (and any other device on network 172.17.10.0/24) will be able to ping CiM 2
or access CiM 2 via Telnet or FTP or web interface.