Configuration, 2 configuration, 1 des c – Comtech EF Data CiM Quick-Start Guide User Manual
Page 19
CiM Quick Start Guide
Rev. 1
Operation
CD/CIMQSTART.IOM
9
1.8.2 C
ONFIGURATION
1.8.2.1 DES C
ONFIGURATION
Step Description
1
From the Main Menu select Administration sub-menu
2
From the Administration Menu select the Feature Configuration sub-menu
3
Enable Transmit DES Encryption by pressing T
4
Enable Receive DES Dencryption by pressing R
5
From the Administration Menu select the DES Configuration sub-menu
6
Set Transmit Key 1 to ABCDEF0123456789
3
7
Set Transmit Key 2 to FEDCBA0123456789
4
8
Set Receive Key 1 to 0123456789ABCDEF
9
Set Receive Key 2 to FEDCBA9876543210
10
From Main Menu select Route Table sub-menu
11
Select QOS/DES sub-menu
12
Select first route by pressing 1
13
Press Enter for Minimum and Maximum Bandwidth
14
Set DES Key to 1 (i.e. Key 2 – ABCDEF0123456789 will be used to encrypt all
datagrams on this route)
1.8.2.2 S
AVE
C
ONFIGURATION
Save parameters to permanent storage.
3
Customer may select another 16 hex digit key. This key must match the receive Key 1 on the other CiM.
4
Customer may select another 16 hex digit key. This key must match the receive Key 2 on the other CiM.