Comtech EF Data CiM Quick-Start Guide - Manual (Page 11)

1
Chapter 1. Getting Started
Introduction 1
Sample Configuration
1
Equipment List 1
Equipment Setup 2
PC Configuration 2
Transmit and Receive IF Configuration 3
Basic IP Configuration 3
Using Encryption 8
Using QoS 11
Other Configuration Items 11
1.1 I
NTRODUCTION
This quick start guide will allow a user to configure a pair of CiM-550 or CiM-300L
(referred to CiM in rest of the document) from beginning (i.e. starting from factory
default settings) and be able to pass traffic within minutes. It is assumed that the user is
familiar with the configuration of the base satellite modem.
1.2 T
YPICAL
P
OINT
-
TO
-P
OINT
S
YSTEM
C
ONFIGURATION
The steps in this guide will lead to following configuration:
IP Address:
Mask:
GW:
172.16.10.100
255.255.255.0
172.16.10.10
PC 1
Satellite IP Modem (CiM 1)
Ethernet Interface (fei0)
IP Address:
Mask:
172.16.10.10
255.255.255.0
HDLC Interfacce (hdl1)
IP Address:
Mask:
10.1.1.1
255.255.255.0
10/100 BaseT
Etherneet Hub
RF or IF
IP Address:
Mask:
GW:
172.17.10.100
255.255.255.0
172.17.10.10
PC 2
Satellite IP Modem (CiM 2)
10/100 BaseT
Etherneet Hub
Ethernet Interface (fei0)
IP Address:
Mask:
172.17.10.10
255.255.255.0
HDLC Interfacce (hdl1)
IP Address:
Mask:
10.1.1.2
255.255.255.0
Figure 1. Typical Point-to-Point System Configuration