Equipment list, Equipment setup, Pc configuration – Comtech EF Data CiM Quick-Start Guide User Manual
Page 12: 3 equipment list, 4 equipment setup, 5 pc configuration, 5 pc c, Quipment, Etup, Onfiguration
CiM Quick Start Guide
Rev. 1
Operation
CD/CIMQSTART.IOM
2
1.3 E
QUIPMENT
L
IST
Following equipment is required:
Item Equipment
Quantity
Comments
1 CiM-550
Modem
2
2
10/100baseT Ethernet Hub
2
Provided by customer
3
PC with NIC and a terminal
emulation program
2
Provided by customer
4
Console cable (DB-9 to RJ-11)
1
Can be procured from Comtech EF Data
5
Ethernet cables
4
Provided by customer
6
IF cables
2
Provided by customer
(For IF loopback only. Additional
equipment required for RF connectivity.)
7
Traffic Generator such as
SmartBits
1
Provided by customer
1.4 E
QUIPMENT
S
ETUP
Step Description
1
Connect each CiM to the PC via the Ethernet Hub.
2
Connect the TX IF on CiM 1 to RX IF of CiM 2 and vice-versa.
3
Connect the DB-9 end of the console cable to the COM1 or COM2 port of the PC and
the RJ-11 end to the console port at the back of CiM 1.
4
Connect CiM 1 and CiM 2 to suitable power supply and turn them ON.
1.5 PC C
ONFIGURATION
Step Description
1
Set the IP address on PC 1 to 172.16.10.100, mask to 255.255.255.0 and gateway to
172.16.10.10.
2
Set the IP address on PC 2 to 172.17.10.100, mask to 255.255.255.0 and gateway to
172.17.10.10.
Reboot the PCs (if required).