Comtech EF Data QAM256 - Manual (Page 53)

QAM256 Digital Video Modulator and Upconverter SNMP MIB
TM077 – Rev. 4.0 B- 7
Bit 2..7=Spares"
::= { radQAM256ModStatus 9 }
radQAM256TxLatchedMinorAlarm2Status
OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"Bits
0 ..7 Spares"
::= { radQAM256ModStatus 10 }
radQAM256TxLatchedCommonAlarm1Status
OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"Bit 0=Interface hardware fault 1=Fault
Bit 1=M&C Hardware Fault
Bit 2..7 Spares"
::= { radQAM256ModStatus 11 }
radQAM256TxLatchedCommonAlarm2Status
OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS current
DESCRIPTION
"Bits
0 ..7 Spares"
::= { radQAM256ModStatus 12 }
radQAM256TxCarrierStatus
OBJECT-TYPE
SYNTAX INTEGER { off(1), on(2) }
ACCESS read-only
STATUS current
DESCRIPTION
"Shows status of the carrier, on or off"
::= { radQAM256ModStatus 13 }
radQAM256TxInterfaceCardType
OBJECT-TYPE
SYNTAX INTEGER { None(1), g703(2), pasi(3), ecl(4), hssi(5), aasi(6), smpt(7),
t3t1(8) }
ACCESS
read-only
STATUS current
DESCRIPTION
"Shows different available interface card types. SMPT and t3t1 interfaces are not yet implemented."
::=
{ radQAM256ModStatus 14 }
radQAM256TxOptions
OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS current
DESCRIPTION
"This describes the Tx available options:
Bit 0 = Clock polarity
Bit 1 = Data polarity
Bit 2 = Clock activity
Bit 3 = Data activity
Bit 4 = Data fifo 1
Bit 5 = Data fifo 2
Bit 6 = Tx buffer
Bit 7 = Internal clock
Bits 8..15 = Spares
0 = unavailable, 1 = available"
::= { radQAM256ModStatus 15 }
radQAM256CommonOptions
OBJECT-TYPE
SYNTAX INTEGER (0..65535)