Comtech EF Data QAM256 - Manual (Page 47)

QAM256 Digital Video Modulator and Upconverter SNMP MIB
TM077 – Rev. 4.0 B- 1
SNMP MIB
B
QAM256-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises
FROM
RFC1155-SMI
OBJECT-TYPE
FROM
RFC-1212;
-- groups in Radyne specific MIB
radyne OBJECT IDENTIFIER ::= { enterprises 2591 }
qam256 OBJECT IDENTIFIER ::= { radyne 6 }
radQAM256ModNVStatus OBJECT IDENTIFIER ::= { qam256 1 }
radQAM256ModStatus OBJECT IDENTIFIER ::= { qam256 2 }
radQAM256TxCarrierControl
OBJECT-TYPE
SYNTAX INTEGER { off(1), on(2) }
ACCESS read-write
STATUS current
DESCRIPTION
"Turns carrier on and off"
::= { radQAM256ModNVStatus 1 }
radQAM256TxTransmitPower
OBJECT-TYPE
SYNTAX INTEGER (-250..0, 450..600)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the Tx power level in dBm from +0.0 to -25.0 for the QAM25636Mhz and QAM25644Mhz. There is an
implied decimal point. For example a value of -39 represents a transmit power level of -3.9 dBm. Selects the Tx
power level in dBv from +45.0 to +60.0 for the QAM256cable. There is an implied decimal point. For example a
value of 500 represents a transmit power level of 50.0 dBv."
::=
{ radQAM256ModNVStatus 2 }
radQAM256TxIFFrequency
OBJECT-TYPE
SYNTAX INTEGER (35000000..862000000)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects IF frequency in Hz. The frequency range of the QAM25636Mhz is 35 MHz to 37 MHz, of the
QAM25644Mhz is 43 Mhz to 45 MHz and of the QAM256Cable is 50 Mhz to 862 Mhz."
::=
{ radQAM256ModNVStatus 3 }
radQAM256TxDataRate
OBJECT-TYPE
SYNTAX INTEGER (1000000..56800000)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the data rate in BPS. The data rate is variable from 1 Mbps to 56.8 Mbps."
::= { radQAM256ModNVStatus 4 }
radQAM256TxSymbolRate
OBJECT-TYPE
SYNTAX INTEGER (1000000..7100000)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the symbol rate in SPS. The symbol rate is variable from 1Msps to 7.1Msps."
::= { radQAM256ModNVStatus 5 }