Comtech EF Data QAM256 - Manual (Page 49)

QAM256 Digital Video Modulator and Upconverter SNMP MIB
TM077 – Rev. 4.0 B- 3
radQAM256TxClockPolarity OBJECT-TYPE
SYNTAX INTEGER { normal(1),
inverted(2) }
ACCESS read-write
STATUS current
DESCRIPTION
"Selects clock polarity for Tx terrestrial clock relative to Tx data."
::= { radQAM256ModNVStatus 12 }
radQAM256TxDataPolarity
OBJECT-TYPE
SYNTAX INTEGER { normal(1),
inverted(2) }
ACCESS read-write
STATUS current
DESCRIPTION
"Selects
data polarity"
::= { radQAM256ModNVStatus 13 }
radQAM256TxCarrierMode
OBJECT-TYPE
SYNTAX INTEGER { normal(1),
cw(2) }
ACCESS read-write
STATUS current
DESCRIPTION
"Normal sets the carrier to normal CW causes the modulator to output pure carrier"
::= { radQAM256ModNVStatus 14 }
radQAM256TxMajorAlarm1Mask OBJECT-TYPE
SYNTAX
INTEGER (0..255)
ACCESS read-write
STATUS current
DESCRIPTION
"Major
Alarm 1 mask:
Bit 0=Mod Hardware fault 1=Fault
Bit 1=Tx Synthesizer fault
Bit 2=Tx Data PLL lock fault
Bit 3=Tx Framing Lock (Unused)
Bit 4=Mod Chip 1 Lock fault (Unused)
Bit 5=Mod Chip 2 Lock fault (Unused)
Bit 6=Mod Chip 3 Lock fault (Current chip used)
Bit 7=Spare
0 = Mask, 1 = Allow"
::= { radQAM256ModNVStatus 15 }
radQAM256TxMajorAlarm2Mask OBJECT-TYPE
SYNTAX
INTEGER (0..255)
ACCESS read-write
STATUS current
DESCRIPTION
"Major
alarm 2 mask:
Bits 0..7 = spares
0=mask, 1=allow"
::= { radQAM256ModNVStatus 16 }
radQAM256TxMinorAlarm1Mask
OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS current
DESCRIPTION
"Minor
Alarm 1 mask:
Bit 0=Clock activity detect fault
Bit 1=Data activity detect fault
Bit 2..7=Spares
0=Mask, 1=Allow"
::= { radQAM256ModNVStatus 17 }