Compuprint SP40 - Manual (Page 44)

The Vertical Offset Tuning values correspond to 1/60 inches and set the vertical offset of
the first print line starting from the default standard position at 1 mm from the upper paper
margin.
The Horizontal Offset Tuning values correspond to 1/60 inches and set the horizontal offset
of the first print line starting from the default standard position at 3 mm from the left paper
margin.
If you need to change the default position of the first print line the vertical offset can be set in
the Vertical Position Offset lines and/or the horizontal offset in the Vertical
Position Offset lines. Both these values correspond to 1/10 inch values.
1 mm
3 mm
X X
X X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X
Vertical Offset Tuning
Vertical Offset Tuning
VERT. DEF. POS
HORIZ
DEF.
POS
Horizontal Offset Tuning
= FIRST PRINT POSITION
3. Fill in the marker corresponding to the value you want to set.
40