Compuprint SP40 - Manual (Page 36)

PROGRAM 1 PROGRAM 2
Setup Parameter Values Description
PROTOCOL EPSON 570, IBM X24E,
X24E AGM, IBM 2390,
OLI. PR40+, OLI. PR2,
OLI. PR2845, IBM 4722,
IBM 9068 Defines the printer protocol.
NOTE
: For the IBM 4722 and 9068 protocols, if the software driver
uses the controlled link of the IBM financial driver, set the IBM
FINANCIAL item in the Configuration Menu.
FONT Draft, Courier, OCR-B,
Gothic, Prestige, Present,
OCR-A, Script, Boldface Selects the font.
DOWNLINE
LOADING disabled, enabled Disable or enable the font downloading
HORIZONTAL
PITCH 10 cpi, 12 cpi, 15 cpi,
16.6 cpi, 17.1 cpi, 20 cpi Selects the character spacing in characters per inch (cpi).
VERTICAL PITCH 5 lpi, 6 lpi, 8 lpi Selects the line spacing in lines per inch (lpi).
LOCK no lock, font, hor. pitch,
font+hor.pitch The following selections made in the printer setup may be locked:
font, horizontal pitch (
hor.pitch), or both the font and horizontal
pitch ( font+hor. pitch). The locked settings cannot be
changed via software commands.
FORM LENGTH # lines, A4, letter, A5, legal Sets the page length in number of lines or standard formats A4,
Letter, A5 or Legal. If you select # lines, you must indicate the
number of lines you want to set in the scheme below this
selection. The values range between 0 and 255. To set the values
combine the numbers considering that the first line corresponds to
the hundreds, the second line to the tens and the third line to the
32