beautypg.com

4 - reader text commands, 3 - erase prefix and suffix settings – Code CR2 User Manual

Page 63

background image

C001537_18_CR2_User_Manual

57

Save Settings

6.4 - Reader Text Commands

Enabling Reader Text Commands allows the CR2 to accept text commands via RS-232 or RF commmunication. Scan
the following codes to enable/disable reader text commands:

Reader Text Commands On

Reader Text Commands Off - Default

Note: Text commands can only be sent to the reader when it is active. Refer to Reader-Host Interface Control Document
for more information.

6.3 - Erase Prefix and Suffix Settings

Scan the following codes to erase all prefix and suffix data.

Erase Prefix & Suffix Data

See also other documents in the category Code Equipment: