Code CR2 User Manual

Page 55

C001537_18_CR2_User_Manual

Save Settings

4.5 - Reader ID and Firmware Version

4.6 - Reader Settings Lock

To lock or unlock the current settings on your reader please scan the codes below:
Reader Settings Locked

Reader Settings Unlocked

NOTE: Prefix and Suffix programming codes, memory transfer and delete commands, “Clear All CodeXML Rules” and
“Suffix -Erase/None”commands are not locked by this feature.

To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read
the following code:
Reader ID and Firmware

You will see a text string indicating your firmware version and CR2 ID number (see below):

Xap/i - Code Internal ID (not applicable)

VVVV is the application firmware version number

WWWW is the bootloader firmware version number

XXXX is the radio firmware version number

SSSSSSSSSS Reader’s serial number (ten digits)

P is “A” if running firmware is the application, “B” if BootLoader

XXX-XX+XX - Internal ID (not applicable)

Example:

Xap/i3000300006040010002363A06D-SD+SQ

Note: Code will periodically release new firmware for CR2 readers. For information on latest firmware versions, call Code
at (801) 495-2200. To upgrade firmware, please visit our website at

http://www.codecorp.com/codesupport/html and

follow instructions provided.

Xap/iVVVVWWWWXXXXSSSSSSSSSSPXX-XX+XXX