Cloud Electronics PS16 - Manual (Page 7)

6 Pump Station 16-R: I NSTALLATION AND OPERATION MANUAL
The WP-8 will provide 150mW of power in stereo configuration and 300mW in mono into 8 Ω
speakers. The impedance of the speakers is not critical however the unit will deliver more
power into speakers with an impedance of >8
Ω.
Be vigilant when wiring the WP-8 since wiring errors can cause flawed operation. If a problem
is experienced, turn off the power, disconnect the WP-8 and double-check the wiring.
The Cloud WP-8 is designed to be wall mounted. The WP-8 is the same physical size as a
single UK electrical socket (13A Type) and can be mounted in the recessed back box provided
or be surface mounted in a standard 25mm deep housing.
The Cloud WP-8 is fitted with a 3.5mm stereo jack socket that will accept a pair of stereo
headphones. We recommend the use of headphones with 32-ohm impedance for example, the
Cloud CP-32.
It is also possible to obtain a line level output from the WP-8 by wiring it as follows:
Permanent Line Level Output (Stereo) Switchable Line Level Output (Stereo)
Permanent Line Level Output (mono) Switchable Line Level Output (mono)
The output of the WP-8 can be used to drive a pair of powered speakers if extra volume is
required. The diagram below shows how this can be achieved.
Powered Speaker Output (mono) Powered Speaker Output (stereo)
16-07-02 V2.1