Cloud Electronics PS16 - Manual (Page 11)

10 Pump Station 16-R: I NSTALLATION AND OPERATION MANUAL
18 EMC Considerations
The Cloud Pump Station 16-R fully conforms to the relevant electromagnetic compatibility
(EMC) standards and is technically well behaved; you should experience no operational
problems and under normal circumstances, no special precautions need to be taken. If the unit
is to be used within close proximity to potential sources of HF disturbance such as high power
communications transmitters, radar stations and the like, the performance of the unit may be
reduced. We suggest that the global input cable screen be connected to the shell of the XLR
type connector and the line input leads are kept as short as possible.
19 Technical Specifications
Line Inputs
Frequency response 20Hz – 20kHz ±0.5dB
Input level -14dBu (155mV) to +6dBu (1.55V)
Input impedance 47kΩ
Input gain range 20dB
Input level indicator LED – illuminates above a fixed threshold
Input connector 2 x RCA phono jack (stereo)
Global Input
Frequency response 20Hz – 20kHz ±1dB
High pass filter -3dB @ 200Hz – 3 pole (with in/out switch)
Gain range 0dB to 50dB
Input impedance 5kΩ
CMR >70dB @ 1kHz
Access contact Channel off/on by closing contact
Headphone Output – via RH-8
Nominal output level 100mW rms per channel with 32Ω load
Optimum load impedance 32Ω
Recommended headphones Cloud CP32
Headphone Output – via WP-8
Nominal output level 100mW rms per channel with 32Ω load
Optimum load impedance 32Ω
Recommended headphones Cloud CP32
Speaker Output – via WP-8
Nominal output level 150mW rms per channel with 8Ω load
Optimum load impedance >8Ω
Line Output – Channel 16
Nominal output level 0dBu (775mV)
Minimum load 600Ω
20 General Specifications
Pump Station 16-R
Power consumption 25VA with approved external transformer
Width 482.6mm (19.0”)
Height 88.0mm (3.50”) – 2U
Depth 170.0mm (6.70”) + connectors
Weight 4.0kg net
Power Transformer
16-07-02 V2.1
Output 15V AC 1.25A 18.5VA
Weight 0.52kg net